FXB-D52-MFDM Multifunctional Digital Display

FXB-D52-MFDM Digital Multifunction Display Instrument

The FXB-D52-MFDM digital multifunction meter can simultaneously measure and display six parameters: AC voltage, AC current, active power, power factor, frequency, and electrical energy. The meter's display section uses a color high-definition LCD screen.

Key technical indicators

1. 
   
2. Measurement accuracy: 1% ± 2
   
3. 
   
4. Measurement range:
   • AC voltage: AC 15.0–300.0V
   • Alternating current: AC 0–100.0A, current display resolution is 0.01.
   • Power frequency: 40.0Hz–150.0Hz
   • Frequency factor: 0.00–1.00 PF
   • Active power: The measurement range is 0–30000W. The display resolution is 0.1W for values between 0–9999.9W and 1W for the rest.
   • Electrical energy: Measurement range is 0–999999 kWh
     . The minimum display resolution for 0–999.99 kWh is 0.01 kWh
     . The minimum display resolution for 10000.0–9999.9 kWh is 0.1 kWh.
     The minimum display resolution for 10000.0–99999 kWh is 1 kWh.
   
   
5. 
   
6. Measurement speed: approximately 2 times per second
   
7. External dimensions: 54×80×64
8. Installation method: Rail type

Instructions for use and wiring method

1. Connect the measured voltage to terminals 1 and 2.
2. The connection between the instrument and the internal current transformer is shown in Figure 1. Pass the main circuit wire through the hole on the instrument (in any direction).
3. The connection between the instrument and the external current transformer is shown in Figure 2. Pass the wires through the holes on the instrument and connect the two wires of the transformer to terminals 3 and 4.
4. After power is applied, the instrument displays the measurement parameters.
5. When powered on, you can press and hold the RESET button for 5 seconds, after which the electrical energy will be zero, and will begin accumulating when you release the button. When the power is off, the meter can save the value of the electrical energy and continue accumulating data the next time the meter is powered on.
   
6. In
   

                        This product can only be used to measure AC current in the 40-150Hz range.